Weight*
2100 kg
4630 lbs
Power**
27.5 kW
Productivity***
4,9 m³/h
- * Machine weight: Excluding attachment and extra equipment
- ** Power: Valid for 400V/50Hz and 440V/60Hz
- *** Estimated production rate with breaker in normal strength rebar reinforced concrete (approx)
Product Sheet
Brokk 200+
This compact machine seamlessly blends immense strength with impressive reach
With added smart sensors and a sophisticated operator support system relaying updates in real-time, the Brokk 200+ provides added intelligence and unmatched power-to-size ratio. The newest generation Brokk 200+ defies its size by accommodating heavy attachments, outperforming any competition.
Technical Specifications
| Hydraulic breaker in illustrations. Load and stability diagram available on request. | BHB 305 |
|---|
Performance
| Slewing speed | 10 sec/360° |
|---|---|
| Transport speed, max. | 2.1 km/h; 1.3 mph |
| Climbing inclination, max. | 30° |
Hydraulic system
| Hydraulic system capacity | 85 l; 22.5 US gal |
|---|---|
| Pump type | Variable load-sensing |
| System pressure | 18 MPa; 2611 psi |
| System pressure, increased to attachment, max. | 23 MPa; 3336 psi |
| Pump flow 50Hz | 85 l/min; 22.5 US gal/min |
| Pump flow 60Hz | 102 l/min; 27 US gal/min |
Power system
| Power technology | SmartPower+ |
|---|---|
| Electric motor type | ABB |
| Power* | 27.5 kW |
| Recommended fuse size* | 63 A |
| Starting device | Soft start/Direct start |
Control system
| Control unit | Portable |
|---|---|
| Signal code | Digital |
| Transfer | Professional radio/Cable |
| Range, radio | Up to 300 m |
Weight
| Machine weight** | 2100 kg; 4630 lbs |
|---|---|
| Recommended max. attachment weight | 350 kg; 772 lbs |
Noise level
| Sound power level LWA*** | 87 dB(A) |
|---|
| Width min. | 780 mm; 30.7 in |
|---|---|
| Height min. | 1351 mm; 53.2 in |
| Vertical reach (incl. breaker) | 5450 mm; 215 in |
| Horizontal reach (incl. breaker) | 5100 mm; 201 in |
Compatible attachments
Where it works
| Cement | Kiln and preheater maintenance in heat |
|---|---|
| Construction | Stairwells, floor slabs and interior strip-outs |
| Metal Processing | Furnace relining and taphole work in residual heat |
| Mining | Scaling, secondary breaking and ore pass clearing |
| Nuclear | Decommissioning cells with no human access |
| Tunnelling | Scaling and profiling where the heading is too tight for a rig |
Technical Drawings
