Weight*
5200 kg
11,464 lbs
Power**
41 kW
Productivity***
9 m³/h
- * Machine weight: Excluding attachment and extra equipment
- ** Power: Valid for 400V/50Hz and 440V/60Hz
- *** Estimated production rate with breaker in normal strength rebar reinforced concrete (approx)
Product Sheet
Brokk 500+
The newest Brokk 500⁺ boasts a robust design and outstanding reach, dominating within the industry
Powered by a state-of-the art electrical powertrain, the new Brokk 500+ boasts a robust design, exceptional power and outstanding reach, dominating the industry. Cutting-edge technology and an innovative operator support system for better communication between the operator and the robot enhance the operating experience.
Technical Specifications
| Hydraulic breaker in illustrations. Load and stability diagram available on request. | BHB 705 |
|---|
Performance
| Slewing speed | 16 sec/360° |
|---|---|
| Transport speed, max. | 1.8 km/h; 1.1 mph |
| Climbing inclination, max. | 30° |
Hydraulic system
| Hydraulic system capacity | 145 l; 38 US gal |
|---|---|
| Pump type | Variable load-sensing |
| System pressure | 18 MPa; 2611 psi |
| Increased pressure to attachment | 24 MPa; 3481 psi |
| Pump flow 50Hz | 115 l/min; 30 US gal/min |
| Pump flow 60Hz | 130 l/min; 34 US gal/min |
Power system
| Power technology | SmartPower+ |
|---|---|
| Electric motor type | ABB |
| Power* | 41 kW |
| Recommended fuse size* | 63 A |
| Starting device | Soft start/Direct start |
Control system
| Control unit | Portable |
|---|---|
| Signal code | Digital |
| Transfer | Professional radio/Cable |
| Range, radio | Up to 300 m |
Weight
| Machine weight** | 5200 kg; 11,464 lbs |
|---|---|
| Recommended attachment weight | 700 kg; 1543 lbs |
Noise level
| Sound power level LWA*** | 100 dB(A) |
|---|
| Width min. | 1600 mm; 63 in |
|---|---|
| Height min. | 1677 mm; 66 in |
| Vertical reach (incl. breaker) | 7300 mm; 287 in |
| Horizontal reach (incl. breaker) | 7000 mm; 276 in |
Compatible attachments
Where it works
| Cement | Kiln and preheater maintenance in heat |
|---|---|
| Construction | Stairwells, floor slabs and interior strip-outs |
| Metal Processing | Furnace relining and taphole work in residual heat |
| Mining | Scaling, secondary breaking and ore pass clearing |
| Nuclear | Decommissioning cells with no human access |
| Tunnelling | Scaling and profiling where the heading is too tight for a rig |
Technical Drawings
