Brokk 500

Logoname
Adding 40 percent of smart power to size up effectiveness of your next project.

Want our catalog?

The new Brokk 500 brings 40% more demolition power than its predecessor. And it provides the ability to size up the attachments, such as the powerful BHB 705 breaker. With the new reinforced design and additional work reach over the Brokk 400, while keeping about the same size and weight, it sets a new benchmark in power-to-size ratio in its segment. The Brokk 500 is equipped with Brokk SmartPowerTM – an intelligent and hardened electrical system that increases the power output for maximum performance and industry leading availability over the lifetime of the machine. To top it off, the machine also adds the clever improvements of SmartDesignTM that will simplify the daily maintenance. In short – stronger, smarter and tougher!

  • 40% more demolition power with the BHB 705 breaker
  • Increased work reach and radius
  • 41 kW Brokk SmartPowerTM electrical system
  • Brokk SmartDesignTM and SmartRemoteTM
  • Compatible with all Brokk 400 attachments

Features

Big size grease container

Big size grease container

Reinforced headlight protection

Reinforced headlight protection

Divided hose connection – outriggers

Divided hose connection – outriggers

Hydraulic breaker in illustrations.
Load and stability diagram available on request.
BHB 705

Performance

Slewing speed
16 sec/360°
Transport speed, max.
2,5 km/h; 1.6 mph
Climbing inclination, max.
30°

Hydraulic system

Hydraulic system capacity
145 l; 38 US gal
Pump type
Variable load-sensing
System pressure
18,0 MPa; 2 611 psi
Increased pressure to attachment
24,0 MPa; 3 481 psi
Pump flow 50Hz
115 l/min; 30 US gal/min
Pump flow 60Hz
130 l/min; 34 US gal/min

Power system

Power technology
SmartPower
Electric motor type
ABB
Power*
41 kW
Recommended fuse size*
63 A
Starting device
Soft start/Direct start

Control system

Control type
SmartRemote, portable control
Signal code
Digital
Transfer
Professional radio/Cable
Range, radio
Up to 300 m

Weight

Machine weight**
5 200 kg; 11464 lbs
Recommended attachment weight
700 kg; 1543 lbs

Noise level

Sound power level LWA***
100 dB(A)

Width min.
1600 mm; 63 in
Height min.
1677 mm; 66 in
Vertical reach (incl. breaker)
7300 mm; 287 in
Horizontal reach (incl. breaker)
7000 mm; 276 in

*Valid for 400V/50Hz and 440V/60Hz
**Excluding options and attachment
***Measured according to directive 2000/14/EC, excl. attachment

Extra Cylinder Protection

Extra Cylinder Protection

Provides impact protection for C2 and C3 and works as a heat shield when working in red hot environments.

Download PDF
Heavy duty dipper arm

Heavy duty dipper arm

With the breaker direct mounted and the cylinder underneath the dipper arm this option is perfect for heavy duty applications.

Heat resistant hoses

Heat resistant hoses

Suitable for red hot applications.

Download PDF
Forced draft cooling of machine

Forced draft cooling of machine

Suitable for high ambient temperatures. Flushes cool air into electrical cabinet and cooler.

Download PDF
Forced draft cooling for breaker

Forced draft cooling for breaker

Suitable for red hot applications and flushes air through the breaker.

Download PDF
Steel pads

Steel pads

Suitable when machine is placed on very hot ground.

Download PDF
Air flushing for breaker

Air flushing for breaker

Air flushing prevents dust from entering the breaker, especially useful for upwards breaking and a must for underwater use.

Waterspray

Waterspray

Sprays water when breaker is activated and binds dust efficiently.

Download PDF
Extra hydraulic function

Extra hydraulic function

Required for certain tools only.

Download PDF
Counterweight

Counterweight

Allows the use of extra heavy tools.

Download PDF
Cable reel

Cable reel

Spring loaded cable reel keeps track of the power cable.

Download PDF
Lifting eyes

Lifting eyes

Dedicated lifting eyes for easy connection. (Regular lifting points standard on all machines.)

Download PDF
Brokk cover

Brokk cover

Protects the Brokk machine during transport or storage.

Breakers

Brokk’s hydraulic breakers are the most versatile and effective attachments for your Brokk robot

Concrete crushers

A concrete crushers allows you to do silent demolition with less noise, dust and vibration

Metal shears

Our wide range of metal shears allows you to cut steel of many different sizes

Buckets

Turn your Brokk robot into a flexible excavator, optimal for confined spaces.

Clamshell buckets

Brokk’s wide range of clamshell buckets transforms your Brokk robot into the perfect machine for sorting material and debris.

Multi Purpose Grapples

Make your work even more efficient with a multi purpose grapple from Brokk, the ideal attachment for loading, sorting, and separating debris.

Sorting & demolition grapples

Sorting and demolition grapples are tailor-made and ideal for soft demolition and stripping structures inside of buildings.

Planers

Brokk planers remove concrete, paint, asbestos, or other layers in a controlled manner up to a certain depth

Drilling

Drill holes in rock, concrete, or compact soil in open or limited spaces

Drum cutters

Brokk drum cutters are designed for trenching, demolition, and concrete surfaces

Beam Grapple

Equipped with a beam grapple, your Brokk robot becomes an excellent and flexible machine for installing steel beams in tunnel and mining applications.

Shot crete

This attachment can turn your Brokk robot into a shotcrete machine for confined spaces.

Cut off saw

Replace hand-held equipment with a Brokk cut off saw.

Splitters

Break hard rocks with a light, powerful, and versatile Brokk splitter

Side angling device

Give your Brokk hydraulic breaker that extra angle for extremely confined spaces.

Thank You!

Thanks for your Email. We’ll answer as soon as possible!

// The Brokk team